Preferences
Poltrona Frau
296 results
Collection: Simona Cremascoli
Brand: Poltrona Frau
Specifications:
A light decoration, inspired by the harp strings it is named after. Harp and Harp Vibration, designed by Simona Cremascoli, are two 100% natural silk rugs, hand-knotted with 86 thousand knots per square meter. Harp has a tone-on-tone striped pattern on the short side and is made with a mixed “cut-loop” technique with low and higher relief that makes the surface dynamic. Harp Vibration is entirely woven using the “cut” technique, which creates the effect of a soft velvet. It displays the typical chevron pattern, interpreted as if the lines were "pinched". Both rugs have a 4 cm cut edge.
Collection: Gamfratesi
Brand: Poltrona Frau
Specifications:
The Homey dining table designed by GamFratesi aims to shine a renewed light on the value of the home and emphasize the centrality of its role in domestic settings that are increasingly attentive to sharing. This designer table is compact and graphic, characterised by light but volumetric lines, enriched by fine and expertly worked materials. The quintessence of Homey is expressed in its die-cast aluminium legs. In a sculptural play reminiscent of haute couture, the two leg flaps fold and join together without touching, creating a chiaroscuro effect in the centre. A refined stylistic exercise that recalls the workmanship of leather, Poltrona Frau's material of choice. The lines of the two flaps open slightly at the top to transform into the shelf that supports it.
Collection: Virginia Harper
Brand: Poltrona Frau
Specifications:
The Hudson side table is composed of a tubular metal structure with gunmetal grey finish. The surface is in sheet metal and black painted birch plywood. The upholstery, in Saddle leather with raw-edge seam and contrast stitching, alternates three full-grain leather panels with three in punched leather with a particular geometric motif. The structure of the Hudson pouf-side table is in birch plywood with light padding in polyurethane foam. The surface is in poplar plywood with curved side panels in hardboard. The upholstery is available in Pelle Frau® leather or fabric.
Collection: Claudio Silvestrin
Brand: Poltrona Frau
Specifications:
The H_O cabinet is available in Pelle Frau® leather or in saddle-leather, either smooth or 'square'. It has four drawers and four compartments with doors and accessories inside.The shelf and structure woods can come in ash-tinted oak for the combinations with light tones of saddle-leather and stone, or Louro Preto in the dark variants of the collection. The entire H_O collection is upholstered with Tortora or Caffè saddle-leather. In the 'square' versions, the basic cover includes a 16x16 cm hand-produced “tone-on-tone” chessboard motif.
Collection: Claudio Silvestrin
Brand: Poltrona Frau
Specifications:
The upper part of the surface features a number of joints that show the craftsmanship of the horizontal slats. The desk pad, made from an MDF panel, is always covered in Cuoio Saddle leather in the colours Tortora or Caffè. The leg is made of metal and upholstered in saddle-leather that matches the desk pad and the fronts of the drawer unit. On the opposite side to the leg, the H_O Desk has a column in Valcamonica porphyry or White porphyry. The H_O President Desk and H_O Executive Desk come in both light and dark versions. The light version sees the White porphyry column, with its white-beige colours, paired with Tortora saddle-leather and the tones of Ash-tinted oak. In the dark version the column in Valcamonica porphyry, with its browny-red tones, is matched with Caffè saddle-leather and the tones of Louro Preto wood. The H_O desks can be accessorised with a modesty panel covered in matching saddle-leather. The saddle-leather, in the two colours, can be either plain or feature a 'square' pattern which is handcrafted to produce a tone-on-tone motif with 16x16 cm chequers.
The H_O drawer unit, which can be positioned to the right or left of the user, but always on the same side as the column, has a poplar plywood structure with Louro Preto or Ash-tinted oak veneer and front in saddle-leather. The drawer unit consists of a drawer and a filing drawer or compartment with door. The joints on the side of the drawer unit show the craftsmanship of the horizontal slats. On the surface, near the column there is an opening through which electric cables can be passed.
Collection: Jean-Marie Massaud
Brand: Poltrona Frau
Specifications:
The In the Mood seating system is available in numerous two or three-seater combinations. These can be enhanced with a curved 45° element that breaks up the classic rigidity of the angular configurations, and with three different types of armrest.The frame of the In the Mood sofa is in tubular metal with interwoven elastic belts. The padding is in variable density CFC-free polyurethane foam and pressed felt. The backrests and armrests are made from birch plywood and hardboard panels with padding in polyurethane foam and polyester wadding. The seat cushions are padded with goose down and polyester wadding with stabilising polyurethane foam insert. The backrest cushions are padded in firmus with separate horizontal chambers to distinguish the various areas of comfort. The feet are in ruthenium-coloured burnished aluminium with protective caps.
The upholstery is available entirely in Pelle Frau® leather or in fabric.
The In the Mood sofa is refined with piping that outlines its edges. In the leather version the piping is always in leather, while in the fabric version the piping can be in leather or matching fabric. It is always possible to remove the covers from the cushions while the covers of the backrest, armrest and frame can only be removed in the fabric versions.
In the Mood can be configured with different types of armrests:
Medium, low, and low outfitted armrest with a flap that accesses a storage compartment covered with black Alcantara and completed with a sliding multipurpose tray made from ash in a wenge stain.
Collection: Roberto Lazzeroni
Brand: Poltrona Frau
Specifications:
More a work of art than a design object, the table Infinito∞ cannot be replicated and has been produced in a limited, numbered and signed amount.The offset, double-oval shape in part recalls the complementary shapes of yin and yang, in part an overturned 8, the symbol of endless perfection and prosperity: hence the name. Each foot is carved from a single block of white Carrara marble, milled by a robotic arm of special dimensions and hand-finished, but the result is anything but heavy: the shape of a tree opening outwards with its "branches", expressing lightness and dynamism and further enhancing the table's elegance and strong sculptural value.
The Infinito∞ table is available in two versions: a limited series of only 8 pieces in the large, double-oval shape, 340x120 cm, supported by two legs. Another 64 pieces have instead been made with the oval top, 220x124 cm, with a single base. In the larger version of the Infinito∞ table the top is crossed by a thin stainless steel blade that has been obliquely set in the marble, serving as a trait d'union of the two oval surfaces.
Given the exceptional nature of the material, the series can never be replicated.
A brass plate with Ruthenium finish bearing the Poltrona Frau logo, the designer's signature and the series number of each copy can be found in the centre of the table below the top: from 1 to 8 for the large version and from 1 to 64 for the smaller version.
Collection: Lella & Massimo Vignelli
Brand: Poltrona Frau
Specifications:
Intervista is an armchair with a supporting structure, for the shell and seat, in steel upholstered with moulded polyurethane. The seat spring system consists of elastic belts. The upholstery of the Intervista armchair is in Pelle Frau® leather. It comes in a 360° variant with swivel base that enables it to rotate about itself.
Collection: Kensaku Oshiro
Brand: Poltrona Frau
Specifications:
The Iren desk by Poltrona Frau comes in a free-standing version, with the desktop supported by a sawhorse base in solid ash, or a wall-mounted version, supported by brackets. The customer can choose whether the desktop slides left or right when making their order.The work surface of the Iren desk increases from 119 cm to 149 cm when the sliding top is completely open. The visible wooden parts are in ash in either a Moka or Wenge stain. The desktops can be upholstered in leather or saddle-leather with tone-on-tone or contrast stitching around the edges. The Poltrona Frau logo is branded on the bottom right of the sliding surface.
Collection: Jean-Marie Massaud
Brand: Poltrona Frau
Specifications:
The structure of the Isidoro mobile bar is made of poplar plywood panelling. The exterior upholstery is in saddle-leather while canvas elegantly decorates the inside walls. Shelves and drawers in poplar plywood with Canaletto walnut veneer. The glass and bottle holder compartments are enriched with mini chromium-plated metal railings. The feet are made of plastic: they have caps for the stationary part while the part that opens has swivel castors. A pair of click-to-close mechanisms with combination ensure the perfect closure of the cabinet.
Collection: Jean-Marie Massaud
Brand: Poltrona Frau
Specifications:
The top of the Jane table is in precious Calacatta gold marble, Emperador marble or in the new Fior di Pesco marble (with glossy or semi-glossy finish). The bottom surface of the top is strengthened with a technical mesh to guarantee its resistance and stability. The supporting structure consists of three columns, each one composed of three elements: a mounting plate for the top, a central wooden column and a base plate. The legs have a solid beechwood core that is enclosed in four high-density MDF panels, shaped and veneered with moka- or wenge-stained ash.
The Jane table is also available in the round table version on four columns with marble top composed of four extractable radial sections and a round central plate that can swivel on request (Lazy Susan). The central top is available in Calacatta gold marble, Emperador marble or Fior di Pesco marble (with glossy or semi-glossy finish). The radial sections can be pulled out by up to 10 cm to make them easier to clean. They are available in Calacatta gold or Emperador marble with glossy finish, matching the type of finish chosen for the central disc.
Collection: Jean-Marie Massaud
Brand: Poltrona Frau
Specifications:
The seat of the Jay Lounge armchair is modelled around the body. The geometries are organic yet taut and sculpted. The backrest and seat are independent of each other. The base, designed ad hoc and die-cast, permits 360° rotation with automatic return to the starting position. The seat structure is in moulded rigid polyurethane reinforced with metal inserts. The padding is in moulded polyurethane foam and polyester wadding. The 4-spoke swivel base is made from aluminium and is available in the blasted-burnished and polished finishes. Pelle Frau® leather upholstery with refined tone-on-tone stitching that embellishes the surface. Jay Lounge is also available in a version with manual recliner mechanism for adjusting the angle of the backrest. The natural complement for the comfort of the armchair is the Jay Lounge pouf which, with its equally clean and sculpted design, comes in the same materials but with fixed base.
Collection: Rodolfo Dordoni
Brand: Poltrona Frau
Specifications:
Lead-coloured steel for the vertical uprights, with the characteristic T-section common to all Jobs elements. Pelle Frau® leather for the upholstery of the MDF doors. The same material for all of the other elements, shelves, compartments and rear panel: the oak veneer with lead or tobacco stain elegantly alternates glossy and matt surfaces. The structure of the Jobs Low Cabinets is in MDF panels with lead or tobacco oak veneer with glossy finish, with the exception of the top refined with matt finish. The base is in lead-coloured brushed steel with adjustable feet and central connecting crossbar painted in scratchproof texturised black paint. The back of the Jobs Bookcase High Cabinet and Low Cabinet has a tilting door that accesses a little internal compartment which allows cables, which rise from the floor to the top, to pass through the slot that runs along the entire length of the surface.
Collection: Rodolfo Dordoni
Brand: Poltrona Frau
Specifications:
Jobs High Cabinet is both a storage unit and a bookcase, and alternates open compartments with shelves and compartments with doors. Perfect against a wall or in the centre of a room, it can also be used to define, divide and organise spaces. Like the rest of the collection, Jobs High Cabinet comes with sophisticated finishes and materials. Lead-coloured steel for the vertical uprights, with the characteristic T-section common to all Jobs elements. Pelle Frau® leather for the upholstery of the MDF doors. The same material for all of the other elements, shelves, compartments and rear panel: the oak veneer with lead or tobacco stain elegantly alternates glossy and matt surfaces.The structure of the Jobs Low Cabinets is in MDF panels with Lead or Tobacco oak veneer with glossy finish, with the exception of the top with its matt finish. The base is in lead-coloured brushed steel with adjustable feet and central connecting crossbar painted in scratchproof texturised black paint. The back of the Jobs Low Cabinet has a tilting door that accesses a little internal compartment that allows cables, which rise from the floor to the top, to pass through the slot that runs along the entire length of the surface. Jobs Low Cabinet is available in two lengths, 230 cm and 284 cm, both of which come in two different versions in terms of doors and drawers.
The structure of the Jobs Drawer Unit comes with a Lead or Tobacco oak veneer with glossy finish while the top has a matt finish. The base is finished with scratchproof texturised black paint and has four swivel castors. The Jobs Drawer Unit comes with two drawers with front covered in Pelle Frau® leather and internal structure finished with scratchproof texturised black paint. The drawers have a single lock positioned on the right side of the unit. The open compartment of the Jobs Drawer Unit is positioned on the opposite side to the drawers.
Collection: Rodolfo Dordoni
Brand: Poltrona Frau
Specifications:
To meet the demand for a flexible and contemporary workspace, the Jobs desks are available in different sizes: The President and Executive Desk comes in the standard, large and 72” versions. The Easy Desk offers standard and large versions. The top is integrated with a storage unit connected to the desk by cable passageways. In the Jobs President Desk the drawer unit consists of an open compartment and two drawers. The Jobs Executive Desk has a suspended unit with two drawers and a filing drawer. The fronts of the drawers, equipped with soft-close mechanism like the filing drawer, are covered in Pelle Frau® leather. The structure of both pieces of furniture is made from lead-coloured brushed steel with characteristic T-section and MDF with Lead or Tobacco oak veneer and glossy finish.The top of the Jobs President Desk is upholstered in Pelle Frau® leather, embellished with a strip of Lead or Tobacco oak, with matt finish that runs right along its length and separates the work area from the “guest area”. The 'guest area' can be upholstered in Pelle Frau® leather, like the rest of the surface, or with a matt, Lead or Tobacco oak veneer, matching the column or cabinet. The top also comes with a sliding door that accesses a small internal compartment equipped with a pen holder that can also be used as a cable passageway.
The Jobs Executive Desk has a suspended drawer unit with lock on the side. The front panel of the drawer is covered in Pelle Frau® leather with internal structure in scratchproof texturised black paint. On the opposite side to the drawer, i.e. the 'guest area' side, the drawer unit has an open compartment.
The Jobs Executive and Jobs Easy Desks also offer a version with 'Meeting area', a circular tabletop mounted on the supporting metal frame of the desk with Lead or Tobacco oak veneer and matt finish.
Collection: Jean-Marie Massaud
Brand: Poltrona Frau
Specifications:
The John-John sofa, designed by Jean-Marie Massaud, is a perfect example of modern, relaxed elegance. Its slender and elongated lines, accentuated by its light feet, exude relaxation and informality while the large and welcoming seat makes it the ideal place from which to enjoy the domestic environment. The John-John sofa has a solid beech structure with central iron crossbar. The backrest and armrests, padded with polyurethane foam and polyester wadding, are in solid beech and poplar with poplar and birch plywood panels. The cushions, padded in soft goose down and covered at the back in microperforated Pelle Frau® leather, adapt to the movements of the body and accentuate the softness and comfort of the seat. The seat spring system consists of elastic belts. Aluminium feet with Ruthenium finish and transparent plastic protective caps.
Collection: Jean-Marie Massaud
Brand: Poltrona Frau
Specifications:
The structure of the John-John Bed headboard is made from solid beech and poplar with MDF infill and padding in polyurethane foam. The cushions are padded in goose down and polyester wadding and attached to the structure by the Pelle Frau® leather upholstery. The bed frame is made from solid beech and poplar with padding in polyurethane foam and is designed to accommodate an ad hoc bed surface consisting of a series of beechwood slats that are fixed to the central crossbar. The Poltrona Frau® slat kit is available in two versions, rigid or with adjustable lower back support. Feet in aluminium with Ruthenium finish. John-John Bed is upholstered in Pelle Frau® leather.
Collection: Jean-Marie Massaud
Brand: Poltrona Frau
Specifications:
The distinguishing trait of the Kennedee sofa is the fine quilting on the backrest and cushions, the perfect embodiment of Poltrona Frau’s historic artisan craftsmanship. The delicate X motif is hand-produced with contrast stitching.The seat structure is in solid seasoned beechwood while the backrest and armrest structure is in seasoned beechwood and MDF. Polyurethane foam and polyester wadding are used for the padding of the backrest, armrests, cushions and pouf.
The spring system consists of elastic belts. Feet in drawn steel with gunmetal grey finish.
Collection: Gianfranco Frattini
Brand: Poltrona Frau
Specifications:
The Kyoto table, in beech or black lacquer, is available in the square 102 cm version with a height of 32 cm, or in the 102 x 50 cm version, also 32 cm high. The surface and legs are in Extra light solid beech wood with solid Canaletto walnut inserts at the end of the boards that make up the top. The wooden boards are connected with 45° joints that form a square pattern. Slide-off counterpoise legs can be positioned as desired, and in the black lacquered version the tops of these are painted matt red. There is also a Mini Kyoto version, a reproduction of part of the tabletop with natural beech finish, which consists of six modules fitted together. All surfaces are treated with a protective transparent varnish.The Poltrona Frau logo and the designer’s signature are laser engraved on one of the faces of the leg supports.
Collection: Poltrona Frau Style & Design Centre
Brand: Poltrona Frau
Specifications:
Le Miniature are true examples of artisan virtuosity. Each model is made by hand using the same materials and finishes as the original, and covered in soft Pelle Frau® leather. The Le Miniature collection includes the Vanity Fair, Dezza 24, Don’do, Intervista and Archibald seats, which are exactly 1/5 the size of the originals.
Collection: Simona Cremascoli
Brand: Poltrona Frau
Specifications:
Functional and decorative in home environments. Leather Basket is a basket that comes in two sizes, made of soft Pelle Frau® leather, created and sewn by hand by expert artisans. The larger version is ideal for holding pots and plants, while in the smaller basket you can store household items such as blankets, magazines and cushions.
Collection: Kensaku Oshiro
Brand: Poltrona Frau
Specifications:
The structure of the Leplì pouf is in birch plywood and poplar with uprights in solid beech and infill in kraftliner. In the version with storage compartment, the side shells are in moulded rigid polyurethane, the metal parts of the opening mechanism and the zips are in nickel-plated steel and zamak, and the lid is in birch plywood. The base is in poplar plywood with a scratch-resistant black lacquered MDF bottom. The seat is padded with polyurethane foam and polyester wadding (the model with storage compartment has polyurethane foam padding for the structure and lid). The Leplì poufs can be upholstered in Pelle Frau® leather or fabric with an ornamental leather band. When the upholstery is in leather the ornamental band is always the same colour as the pouf. In the leather version four folds originate from the central button of the seat to define the profile of the pouf. In the fabric version the folds are replaced by stitching.
Collection: Kensaku Oshiro
Brand: Poltrona Frau
Specifications:
The structure of the Leplì pouf is in birch plywood and poplar with uprights in solid beech and infill in kraftliner. In the version with storage compartment, the side shells are in moulded rigid polyurethane, the metal parts of the opening mechanism and the zips are in nickel-plated steel and zamak, and the lid is in birch plywood. The base is in poplar plywood with a scratch-resistant black lacquered MDF bottom. The seat is padded with polyurethane foam and polyester wadding (the model with storage compartment has polyurethane foam padding for the structure and lid). The Leplì poufs can be upholstered in Pelle Frau® leather or fabric with an ornamental leather band. When the upholstery is in leather the ornamental band is always the same colour as the pouf. In the leather version four folds originate from the central button of the seat to define the profile of the pouf. In the fabric version the folds are replaced by stitching.
Collection: Kensaku Oshiro
Brand: Poltrona Frau
Specifications:
The structure of the Leplì pouf is in birch plywood and poplar with uprights in solid beech and infill in kraftliner. In the version with storage compartment, the side shells are in moulded rigid polyurethane, the metal parts of the opening mechanism and the zips are in nickel-plated steel and zamak, and the lid is in birch plywood. The base is in poplar plywood with a scratch-resistant black lacquered MDF bottom. The seat is padded with polyurethane foam and polyester wadding (the model with storage compartment has polyurethane foam padding for the structure and lid). The Leplì poufs can be upholstered in Pelle Frau® leather or fabric with an ornamental leather band. When the upholstery is in leather the ornamental band is always the same colour as the pouf. In the leather version four folds originate from the central button of the seat to define the profile of the pouf. In the fabric version the folds are replaced by stitching.
Collection: Ludovica + Roberto Palomba
Brand: Poltrona Frau
Specifications:
Let it Be is a modular furniture system, open to infinite configurations. The modular sofas can be completed with shelves and storage units that expand their functions. The structure and the soft down cushions appear to be suspended on saddle-leather straps. The foot, unexpectedly set back compared with the corner, exalts the sensation that the seats are floating in space. The purity of the design melds with the precious details. The visible leather and saddle-leather stitching bring to mind the luxurious workmanship of saddles and harnesses.The structure and cushions are upholstered in Pelle Frau® leather, also combined with fabric. Alternatively, saddle-leather combined with Pelle Frau® leather or fabric. The shelves and armrest or backrest surfaces are upholstered in saddle-leather. Frame in die-cast aluminium with joints in black painted steel. The backrest and armrest structure, padded with polyurethane foam and polyester wadding, is in solid poplar and birch plywood. The seat spring system consists of intertwined elastic belts. Seat cushion padded in goose down and polyester wadding. Moulded aluminium feet of two heights with ruthenium or burnished and blasted finish.
Collection: Gastone Rinaldi
Brand: Poltrona Frau
Specifications:
The seat is welcoming and comfortable. The back acquires new elasticity. The legs, slim and sleek, fit perfectly with the shell. Steel structure with moulded polyurethane foam padding. Elastic belts for the seat and backrest spring system. The feet come with three different finishes: ash veneer with a teak stain, lacquered black or polished chrome. Letizia can be upholstered in Pelle Frau® leather or removable fabric.
Collection: Peter Marino
Brand: Poltrona Frau
Specifications:
The Linea A sofa and armchair are distinctive for the extreme precision of the upholstery stitching, perfectly taut and calibrated in relation to the sturdy solid beech and birch plywood structure. Close attention has also been paid to the internal details like the zigzag springs of the seat and the goose down padding of the cushions with stabilising insert in polyurethane foam. The upholstery is available in Pelle Frau® leather or fabric and in the combination Pelle Frau® leather with pony skin leather for the backrest and seat cushions. Feet in beech with a wenge stain.
Reviews
Google Rating
Based on 41 reviews
3 months ago
I’m very satisfied with my order from Lineaselect. Fast international delivery to Poland, great communication, and polite, professional managers. The tiles arrived in perfect condition.
Highly recommended!
4 months ago
I ordered plumbing and accessories for my apartment renovation in Dubai several times online. Very quick responses by email. In my case, it turned out cheaper and faster to work directly than to try to find something in Dubai. Thank you for your work!
6 months ago
We ordered tiles for our new bathroom. I am very happy with the great service and amazingly fast responsiveness of the whole team! Would recommend and order any time again! Thank you! Best, Katharina
a year ago
I came across to LineaSelect by mistake and one day I sent them an email to see if they can help me with Devon&Devon bathroom items.
The staff was friendly and our communication easy, with both Aiste and Jaunius, very professional.
Today I received the items and I must say I am impressed. They are exactly as described on the website.
I will return for more items in future for sure and I do recommend this website if you wish to get high quality items for your project. ! 👍
6 months ago
I had a disappointing experience with Lineaselect at first. After confirming and paying for a binding offer that included a fixed delivery timeframe, I was informed six days later that the manufacturer was currently unable to deliver the product. I was offered to either cancel the order or wait for a new, undefined lead time.
While communication remained polite, the handling of the situation initially felt unprofessional. Accepting payment and confirming delivery, only to withdraw the offer days later, raised concerns about reliability.
Update:
After this rocky start, Lineaselect made every effort to arrange delivery as quickly as possible. In the end, I have to say it turned out to be a positive overall experience. The team was responsive and tried hard to find a good solution.